Intelligent SMS /GSM Alarm Controller

iDT1-1420S

iDT1-1420S
iDT1-1420S

1埠RS-232/422/485 (4組DI、2組DO)

iDT1-1420S是一款工業級簡訊發報機,運用SMS服務,結合DI/AI/DO連動控制將計數器數值、頻率高低和狀態變化,透過DI的觸發將警報訊息發送至您所設定的通報對象手機上,,讓設備維運管理者無論在任何時間、地點使用手機即可掌握設備運作狀況,必要時亦可利用手機傳送指令立刻處理突發事件,透過RS-232/485通訊埠亦可與串列設備或PLC連接,使其具備自動報警簡訊傳送功能,人性化的使用者介面,只要簡單的幾個設定步驟就可隨插即用,不需外加任何軟體即可讓您的儀器設備具有遠端異常自動報警功能。

Feature
  • GSM 900/1800/850/1900MHz四種頻率
  • 4組數位輸入(DI),2組繼電器數位輸出 (DO)
  • 1組RS-232或485串列通訊埠
  • 可透過RS-232或485串列通訊埠發送簡訊
  • 可利用行動電話發送簡訊控制繼電器的狀態
  • 內建看門狗計時器,設備登入密碼保護功能
  • DIN Rail的導軌設計,現場安裝及配線方便
  • 每組數位輸入(DI)支援計數器、頻率、狀態等訊號輸入
  • 可設定數位輸入觸發(DI)與數位輸出(DO)連動控制功能
  • 具簡訊文字編輯功能,最多可儲存20組編輯簡訊文字
  • 提供定時回報功能,可依時段、日期預先設置時間來回報監測點狀態
  • 可設定數位輸出繼電器常閉(NC)與常開(NO)時間,以及長時間的控制
  • 具通訊錄編輯功能,每組數位輸入(DI)最多可設定50組接收簡訊電話號碼
  • 提供多國語言簡訊格式,簡訊內容最多140個 ASCII字元或70個Unicode字元
Specification
Cellular Interface
Radio Frequency StandardGSM/GPRS
Band optionsQuad-band 850/EGSM 900/DCS 1800/PCS 1900 (Software Selectable)
Multi-slot Class CapableClass 10
Mobile Station ClassClass B
Coding SchemesCS1, CS2, CS3, CS4
Transmission RateUp to 85.6K bps
Transmission PowerTransfer Mode class 10 (3Rx/2Tx): 1.4 Watts @GSM 850 / EGSM 900,
Transfer Mode class 10 (3Rx/2Tx): 1 Watt @ DCS 1800 / PCS 1900
SIM Card Type1.8V / 3 V
Serial Interface
Number of Ports1
Serial ConnectorTerminal block
Serial Signal TypesRS-232/422/485 (Software Selectable)
Terminal ResistorNone/120Ω(Hardware Selectable)
Data Bits5/6/7/8
Stop Bits1/1.5/2
ParityNone/Even/Odd/Mark
Flow ControlRTS/CTS, XON/XOFF for RS232, XON/XOFF for 422 and 485
Baud rate100 bps to 230.4 Kbps
ESD Protection15 KV
I/O Interface
Digital Input4 dry-contact inputs (open – on , grounded – off )
Digital Output2 relay output with current carrying capacity of DC 1A @ 24 VDC / AC 0.5A @ 125VAC
Memory Interface
4MB bytes non-volatile flash memoryfor data logging
Power Requirements
Power InputsTerminal block,
Input Voltage9 to 35 VDC
Power Consumption170 mA (Idle), 650 mA (peak) @12VDC
Physical Characteristics
HousingAluminum
Weight300±5 g
Dimensions(L x W x H)92 x 86 x 40 mm (3.62 x 3.38 x 1.57 in)
Environmental Limits
Operating TemperatureStandard Models: -40 to 85°C (-40 to 185°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95%RH
Warranty
Warranty Period2 years
Device Function
Network ProtocolsPPP, IP, ICMP, UDP, TCP, DNS, DDNS , SNTP, SMTP, Telnet, FTP, RFC2217
Industrial Standard ProtocolsModbus TCP/RTU/ASCII
SecurityIP filtering, user name and password, ignore Ping command
Auto date/time synchronizationAutomatically sync date and time on the network time server.
Dynamic domain name updatingSupport DDNS protocol for regular update device IP address to DDNS Server
SMS TransferEvent alert SMS sending (support multi-language)
Email TransferEvent alert mail sending
FTP Client / ServerFTP Client support auto file sending (Logger data)
Console InterfaceWindows Console (IP/Serial Port), Telnet Console
Independently networking operationSupport TCP Server, TCP Client and UDP on each interface.
Connecting Operation ModeTCP Client support permanent, timestamp, voice callback connection
Serial PortData transparent (TCP Server, TCP Client or UDP), support RFC2217 protocol
Pair Connection (TCP Server, TCP Client)
Modbus TCP to RTU/ASCII converter
Modbus RTU/ASCII Master polling RTU device (Store response data to logger)
Modbus RTU/ASCII Master polling RTU device (Initiate Modbus Unsolicited)
Digital input/outputModbus Master (Modbus Unsolicited), Modbus Slave, Log Mode
Firmware UpgradeAvailable for remote or local firmware upgrade
Software
EZAdmParameter configuration and concurrent firmware upgrade remotely for multiple devices
EZCommRemaps device serial port to virtual serial port.(IP to Serial)
Data Sheet


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>